A single-seat pusher ultralight with folding wings, designed and built from scratch in a home workshop.
Concept illustration. The final pod shape follows the cockpit mock-up.
Drag to turn it, scroll or pinch to zoom, and fold the wings. A concept model built from the design files; the pod takes its final shape from the cockpit mock-up.
Loading the 3D model…
One seat, under 254 lb empty, 5 gallons of fuel, 55 knots top speed and a 24 knot stall. Built to fly as an ultralight vehicle, with no licence or registration needed.
Pull two handles, slide each wing out about two inches, rotate it leading edge up and swing it back. Folded, it is about 7.7 ft wide.
The engine sits behind the pilot and the wing, with tricycle gear, a closed canopy and a gentle, rectangular wing that stalls root first.
Design targets. Every figure is an estimate until the aircraft is built, weighed and flown.
The centre wing stays fixed between the twin booms. Each outer panel locks with four pins and two handles. To fold, pull the handles, slide the wing out about two inches, rotate it leading edge up and swing it back along the boom. About 7.7 ft wide when folded.
A full-size cardboard cockpit to set the seat and pod, then a spar test beam and a short wing section, before an engineer reviews the structure.
The Plumair Aircraft name, logo and colours are set, and plumairaircraft.com is live.
Cantilever wing with a NACA 4415 airfoil and 3 degrees of dihedral, a four-pin folding wing joint, a built-up aluminium spar, and the first weight and balance.
News as it happens: the mock-up, the first spar test, the first engine run and, one day, first flight.
Or write to [email protected] and you will be added to the list.